_25_Brushless_Motor

//brushless motor driver (festplattenmotor)

Steuerung eines Festplattenmotors (mit servo-Library)

#include <Servo.h> 

Servo myservo;  // create servo object to control a servo 

int potpin = 1;  // analog pin used to connect the potentiometer
int val;    // variable to read the value from the analog pin 

void setup() 
{ 
 Serial.begin(9600);
 myservo.attach(3);  // attaches the servo on pin 9 to the servo object 
} 

void loop() 
{ 
 val = analogRead(potpin);            // reads the value of the potentiometer (value between 0 and 1023) 
 val = map(val, 0, 1023, 0, 179);     // scale it to use it with the servo (value between 0 and 180) 
 myservo.write(val);                  // sets the servo position according to the scaled value 
 delay(20);                           // waits for the servo to get there 
 Serial.println(val);
} 

Dieses Beispiel herunterladen